Heat to melt the adhesive sticker under the back cover.
  • Heat to melt the adhesive sticker under the back cover.

Add Comment

Place the suction cup and pull to open a gap between the back cover and the body.And then insert into the guitar pick and slide to cut the sticker.
  • Place the suction cup and pull to open a gap between the back cover and the body.And then insert into the guitar pick and slide to cut the sticker.

  • Attention: Be careful with the bottom side because there is the battery flex cable.

Add Comment

Remove the back cover.
  • Remove the back cover.

Add Comment

And you can replace with the new back cover.
  • And you can replace with the new back cover.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

8 other people completed this guide.

Sophia

Member since: 03/25/2014

35,182 Reputation

96 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 25

Past 30 Days: 222

All Time: 8,344