How to Open the Left Handle of the Backbone One
Adriana Zwink and one other contributor
Last updated on May 7, 2024
Views: 2.4K
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 25
- Past 30 Days:
- 114
- All Time:
- 2,386
Comments: 2
2 guide comments.
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Use this guide to open the left controller handle of your Backbone One for repairs and modding.
What you need
Tools
-
-
-
Use a Phillips screwdriver to remove the four 5.9 mm-long screws.
Ask FixBot
-
-
-
Lift up the upper part of the controller.
-
Swing over the upper cover and place it on the controller case.
-
-
Tool used on this step:Tweezers$4.99
-
Use a pair of tweezers to remove the yellow protective tape which is placed over the interconnect cable connector.
-
-
-
Use the tip of an opening pick to open the gray flap of the ZIF connector by pushing it upwards.
-
-
-
-
Use your fingers to disconnect the interconnect cable from its connector.
-
-
To reassemble your device, follow these instructions in reverse order.
Opening didn’t go as planned? Answers community for help.
2 Guide Comments
Did this work for you?
Did this work for you?
