Skip to main content

Hover-1 Rally Brake Switch Replacement

What you need

  1. Hover-1 Rally Brake Switch Replacement, Brake Switch: step 1, image 1 of 1
    • Rotate and pull the left handle to unscrew it from the handlebar.

    • This will expose the brake switch.

  2. Hover-1 Rally Brake Switch Replacement: step 2, image 1 of 1
    • Remove four 2 mm Phillips #00 screws located on the brake switch.

  3. Hover-1 Rally Brake Switch Replacement: step 3, image 1 of 1
    • Pull the brake switch off of the handlebar.

    • The brake switch sits perpendicular to the handlebar.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Cami Lowrey

Member since: 02/07/20

435 Reputation

3 Guides authored

Team

Cal Poly, Team S7-G2, Regan Winter 2020 Member of Cal Poly, Team S7-G2, Regan Winter 2020

CPSU-REGAN-W20S7G2

6 Members

7 Guides authored

One Comment

Hi good afternoon. I have a Rally H-1 scooter. It seems that my front wheel motor is messed up. But I can't find any parts fvor this scooter. I went on Hoover 1 website. But they don't have any parts available.

colebyauto - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 7

All Time: 325