Hover-1 H1 Battery Replacement

Step 1 Bottom Shell

• Remove the ten 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.
• Remove the twelve 9mm sheet metal screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.
Step 2

• Puncture the two black stickers by using the tip of a screwdriver.
• Remove the two 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.
Step 3
• Lift each side of the bottom shell by pulling up.
• When lifting the shell, take care to not tear any cables from their connectors.
Step 4
• Unplug the battery by pulling gently on both sides of the orange connector.
Step 5 Battery
• Remove the four 7mm screws by using a Phillips #2 screwdriver to rotate the screws counterclockwise.
Step 6
• Gently lift the battery harness and remove the battery by lifting the battery and moving it away from the hoverboard.

Author

with 2 other contributors

Aaron Teh

Member since: 10/08/18

442 Reputation

2 Guides authored

Badges: 7

• 
• 
• 

+4 more badges

Team

Cal Poly, Team S17-G6, White Fall 2018 Member of Cal Poly, Team S17-G6, White Fall 2018

CPSU-WHITE-F18S17G6

4 Members

7 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview