Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

Haiboxing 18859 Motor Replacement

Introduction

If your Haiboxing 18859 is not moving properly, then follow this guide to locate and replace its motor.

Before beginning this guide, make sure that the wheels are not obstructed and the axels are on straight. Either of these being false means they are negatively impacting your wheels functionality. Fix these problems, then test your Haiboxing again. If it is still moving incorrectly, then the motor is likely broken and needs to be replaced.

What you need

  1. Haiboxing 18859 Motor Replacement, Battery: step 1, image 1 of 3 Haiboxing 18859 Motor Replacement, Battery: step 1, image 2 of 3 Haiboxing 18859 Motor Replacement, Battery: step 1, image 3 of 3

    • Remove the 4 clips holding down the hard plastic shell of the RC car. Do this by pinching them with your thumb and index finger and pulling away.

    Edit
    Ask FixBot

  2. Haiboxing 18859 Motor Replacement: step 2, image 1 of 1

    • Lift the hard plastic shell off of the RC car.

    Edit
    Ask FixBot

  3. Haiboxing 18859 Motor Replacement: step 3, image 1 of 3 Haiboxing 18859 Motor Replacement: step 3, image 2 of 3 Haiboxing 18859 Motor Replacement: step 3, image 3 of 3

    • Disconnect the Lego-style battery connector by gripping either side and pulling them away from each other, slowly and consistently.

    Edit
    Ask FixBot

  4. Haiboxing 18859 Motor Replacement: step 4, image 1 of 3 Haiboxing 18859 Motor Replacement: step 4, image 2 of 3 Haiboxing 18859 Motor Replacement: step 4, image 3 of 3

    • Unfasten the Velcro strap that secures the battery.

    Edit
    Ask FixBot

  5. Haiboxing 18859 Motor Replacement: step 5, image 1 of 2 Haiboxing 18859 Motor Replacement: step 5, image 2 of 2

    • Remove the battery.

    Edit
    Ask FixBot

  7. Haiboxing 18859 Motor Replacement, Motor: step 6, image 1 of 1

    • Unplug the motor from the receiver.

    Edit
    Ask FixBot

  8. Haiboxing 18859 Motor Replacement: step 7, image 1 of 1

    • Peel back the warning tape covering the motor.

    Edit
    Ask FixBot

  9. Haiboxing 18859 Motor Replacement: step 8, image 1 of 3 Haiboxing 18859 Motor Replacement: step 8, image 2 of 3 Haiboxing 18859 Motor Replacement: step 8, image 3 of 3

    • Unscrew the 10 mm Phillips #0 screws holding down the motor. This includes the shaft attached down the middle.

    • Place the mounting screws where you won't lose them, such as in a plastic bag or container.

    Edit
    Ask FixBot

  10. Haiboxing 18859 Motor Replacement: step 9, image 1 of 3 Haiboxing 18859 Motor Replacement: step 9, image 2 of 3 Haiboxing 18859 Motor Replacement: step 9, image 3 of 3

    • Unscrew the 16 mm Phillips #1 screws at the rear of the Haiboxing.

    Edit
    Ask FixBot

  11. Haiboxing 18859 Motor Replacement: step 10, image 1 of 2 Haiboxing 18859 Motor Replacement: step 10, image 2 of 2

    • Remove the upwards facing rear-most 8 mm Phillips #1 screws.

    • Remove the trapezoid-shaped part.

    Edit
    Ask FixBot

  12. Haiboxing 18859 Motor Replacement: step 11, image 1 of 1

    • Lift out the motor and the shaft it is attached to.

    Edit
    Ask FixBot

  13. Haiboxing 18859 Motor Replacement: step 12, image 1 of 1

    • Remove the 6 mm Phillips #0 screw holding the motor to the black, plastic shaft.

    Edit
    Ask FixBot

  14. Haiboxing 18859 Motor Replacement: step 13, image 1 of 2 Haiboxing 18859 Motor Replacement: step 13, image 2 of 2

    • Flip over.

    • Detach the shaft from motor.

    Edit
    Ask FixBot

  15. Haiboxing 18859 Motor Replacement: step 14, image 1 of 3 Haiboxing 18859 Motor Replacement: step 14, image 2 of 3 Haiboxing 18859 Motor Replacement: step 14, image 3 of 3

    • Remove the remaining 6 mm Phillips #0 screw holding black, plastic washer in place.

    • Remove the black, plastic washer.

    • Remove the red, paper washer.

    Edit
    Ask FixBot
Conclusion

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Author

with 3 other contributors

Ty.

Member since: 03/21/25

219 Reputation

1 Guide authored

Badges: 3

Team

UMass Dartmouth, Team 6-3, Botvin Spring 2025 Member of UMass Dartmouth, Team 6-3, Botvin Spring 2025

UMASSD-BOTVIN-S25S6G3

3 Members

5 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 39

Past 30 Days: 104

All Time: 542