Disassembling HTC SMT 6175 Keyboard

You're viewing a previously published version of this guide. View latest version

May 19, 2011 - 03:52:40

Jan 04, 2024 - 12:58:18 Dec 27, 2023 - 12:55:14 Nov 21, 2023 - 01:01:09 Nov 21, 2023 - 12:44:14 Nov 21, 2023 - 12:43:20 Nov 15, 2023 - 03:33:52 Jun 29, 2023 - 09:29:11 Jun 29, 2023 - 09:27:44 Jun 29, 2023 - 09:26:37 Jun 29, 2023 - 09:26:23 Jun 29, 2023 - 09:26:11 Jun 29, 2023 - 09:24:53 Jun 29, 2023 - 09:24:33 Jun 29, 2023 - 09:23:56 Mar 25, 2023 - 10:38:48 Mar 25, 2023 - 10:38:27 Mar 25, 2023 - 10:38:11 Mar 25, 2023 - 10:37:48 Mar 25, 2023 - 10:37:39 Mar 25, 2023 - 10:37:24 Mar 23, 2023 - 05:16:28 Mar 23, 2023 - 05:15:29 Mar 23, 2023 - 05:15:03 Mar 20, 2023 - 03:21:13 Jan 28, 2014 - 02:42:48 Jul 31, 2013 - 04:50:57 Jun 03, 2011 - 11:56:42 May 19, 2011 - 03:52:40 May 17, 2011 - 04:54:39 May 17, 2011 - 04:52:58 May 17, 2011 - 04:52:56 May 17, 2011 - 04:25:56 May 16, 2011 - 04:59:48 May 16, 2011 - 04:59:46 May 16, 2011 - 04:59:20 May 16, 2011 - 04:59:19 May 16, 2011 - 04:58:38 May 16, 2011 - 04:58:36 May 16, 2011 - 04:55:12 May 11, 2011 - 04:21:07 May 11, 2011 - 04:20:30 May 11, 2011 - 04:20:28 May 11, 2011 - 04:19:17

Newer

Introduction

The navigation keys are the hard, directional keys on the front of the phone.

The qwerty keyboard are the soft keys on the front of the phone.

What you need

Step 1 Back Case

Disassembling HTC SMT 6175 Keyboard, Back Case: step 1, image 1 of 1

First, flip the phone over so that the back is facing upwards.

Step 2

Using both thumbs, push the back side of the phone's exterior up and remove the front face of the phone.

Step 3 Battery

Disassembling HTC SMT 6175 Keyboard, Battery: step 3, image 1 of 2

Disassembling HTC SMT 6175 Keyboard, Battery: step 3, image 2 of 2

Insert your finger or a pry tool into the slot above the battery. Remove it and set aside.

Step 4 Keyboard

Disassembling HTC SMT 6175 Keyboard, Keyboard: step 4, image 1 of 2

Disassembling HTC SMT 6175 Keyboard, Keyboard: step 4, image 2 of 2

To remove the back casing inside the phone, unscrew the 6 screws that are around the perimeter of the phone.

Step 5

Carefully pull off back casing.
Warning: This can be difficult, but just start pulling the back out from the front shell. As it starts to lift up, continue moving around the phone until the whole back becomes free.

Step 6

Next unscrew the top screw.
Warning: Be CAREFUL because the LCD screen is still attached to the front side of the motherboard by a flexible ribbon cable.

Step 7 QWERTY Keyboard

Disassembling HTC SMT 6175 Keyboard, QWERTY Keyboard: step 7, image 1 of 3

Disassembling HTC SMT 6175 Keyboard, QWERTY Keyboard: step 7, image 2 of 3

Disassembling HTC SMT 6175 Keyboard, QWERTY Keyboard: step 7, image 3 of 3

Pull the plastic keyboard away from the front case.

Step 8 Navigation Keys

Disassembling HTC SMT 6175 Keyboard, Navigation Keys: step 8, image 1 of 3

Disassembling HTC SMT 6175 Keyboard, Navigation Keys: step 8, image 2 of 3

Disassembling HTC SMT 6175 Keyboard, Navigation Keys: step 8, image 3 of 3

To remove the navigation keys on the front of the phone, unscrew these four screws.
Remove the navigation keys from the front of the phone. They should pop out as a unit.