Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

This guide demonstrates how to remove and replace the volume buttons of an HP eStation Zeen in order to preserve the function of the device.

  1. Use a metal spudger to remove the four screw caps. Remove the four 6 mm screws using a Philips #0 screwdriver. Remove the four 6 mm screws using a Philips #0 screwdriver.
    • Use a metal spudger to remove the four screw caps.

    • Remove the four 6 mm screws using a Philips #0 screwdriver.

  2. Insert a plastic opening tool and slide it along the edge to open the back panel. Lift the back panel away from the device. Lift the back panel away from the device.
    • Insert a plastic opening tool and slide it along the edge to open the back panel.

    • Lift the back panel away from the device.

  3. Android Fix Kits

    A new screen or battery is one kit away.

    Shop Now

    Android Fix Kits

    A new screen or battery is one kit away.

    Shop Now
  4. Disconnect the battery clip with a plastic opening tool.
    • Disconnect the battery clip with a plastic opening tool.

    • Be gentle as the connector is fragile.

  5. Remove the two 6 mm screws using a Philips #0 screwdriver.
    • Remove the two 6 mm screws using a Philips #0 screwdriver.

  6. Pull the ribbon from the board.
    • Pull the ribbon from the board.

    • Be gentle as the ribbon is fragile.

dalton hale

Member since: 09/26/2016

473 Reputation

4 Guides authored

Team

USF Tampa, Team 16-4, Eyestone Fall 2016 Member of USF Tampa, Team 16-4, Eyestone Fall 2016

USFT-EYESTONE-F16S16G4

4 Members

10 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 112