HP EliteBook 830 G6 Camera Replacement
Cadence Hohertz and 3 other contributors
Last updated on Jan 13, 2026
Views: 279
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 11
- Past 30 Days:
- 56
- All Time:
- 279
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs More Images
A few more images would make this guide's procedures crystal clear.
Introduction
Go to step 1 ↓Use this guide to replace the built-in camera on an HP EliteBook 830 G6 if it is damaged, malfunctioning, or showing a black screen.
This process involves removing the bezel and disconnecting a small ribbon cable connected to the motherboard.
Be sure to power off the laptop and disconnect all external cables before beginning to prevent electrical damage.
What you need
Tools
-
Spudger4.9
-
-
-
-
-
Locate the camera at the top center of the inside screen.
-
Gently lift the display bezel with a spudger.
-
-
-
-
Disconnect the small ribbon cable at the top of the bezel connecting the camera module to the motherboard.
-
Remove the old camera module by prying it off gently with a spudger.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.
Team
Texas Tech, Team 37-5, Allen Fall 2025 Member of Texas Tech, Team 37-5, Allen Fall 2025
TTU-ALLEN-F25S37G5
3 Members
84 Guides authored
