What you need
-
-
-
Lay the wireless charging assembly onto the frame.
-
Use your fingers to press around the perimeter to engage all of its clips.
-
Stop if the assembly feels like it won't clip in. Check if anything underneath it may be out of place.
Ask FixBot
-
-
-
-
Use a Torx Plus 3IP screwdriver to install the fifteen 5.0 mm‑long wireless charging assembly screws:
-
Thirteen gray screws
-
Two silver non-magnetic screws
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
