What you need
-
-
-
Remove any caps or plastic liners from your replacement front camera lens.
Ask FixBot
-
-
-
Place the front camera in its recess.
-
Use your finger to press and connect the front camera press connector.
-
-
-
-
Remove the copper foil from its large clear liner and place it onto the front camera.
-
Press the top section of the foil to secure it to the camera.
-
-
-
Hold the top section of the copper foil in place with your finger, and use tweezers to slide the liner out of the bottom section of foil.
-
Press the bottom section of copper foil into place to secure it to the logic board.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
