What you need
-
-
-
Use a Torx Plus 3IP screwdriver to remove the 1.9 mm‑long screw securing the battery connector cover.
Ask FixBot
-
-
-
-
Insert the point of a spudger under the top-right corner of the battery connector.
-
Pry up to disconnect the battery.
-
Throughout the repair, pry only at the instructed area (also marked by a gold line on the circuit board) to prevent damage to the delicate components near the connector socket.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
