Introduction
If the Garmin Drive 52 is not responding or announcing voice prompts or traffic alerts, then the internal speaker may be faulty. This guide helps with step-by-step instructions on how to safely open the unit, disconnect the display, remove the motherboard, and lift out the speaker for replacement. No soldering is required on this model, which helps to speed up the process. Before starting the project, power down the device, eject the microSD card, and work on a clean, static-free surface. With the right screwdriver kit and careful handling around the screen, the device can be restored to have a working speaker in under 40 minutes.
What you need
-
-
Pop the suction cup off of the device.
-
Unscrew the four T5 Torx screws on the back.
-
Carefully pry apart the front and back with a Jimmy.
-
To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.