Introduction

The GamStop Universal System is a device that allows you to connect multiple systems to your television while easily switching between the systems. The selector button allows the user to choose which system to switch between when different gaming platforms are simultaneously running.

If your selector button is malfunctioning and not allowing you to properly choose which platform to use, follow this guide. It will demonstrate how to replace the selector button. Before starting this repair be sure to power off your device to avoid further damage. This simple guide requires minimal time and some patience to replace the selector button.

What you need

Step 1 Button

GameStop Universal System Selector Button Replacement, Button: step 1, image 1 of 1

Disconnect the DC 6V IN power cable from the device.
Remove the three front panel screws on the bottom of the device using the Phillips #00 Screwdriver.

Edit

Step 2

Carefully pry off the front panel of the device to reveal the button in need of replacement.
The outer piece of the device is plastic and may break it not carefully handled.

Edit