Step 1 Install the Top Cover




• Use your fingers to lift the hinges over the Top Cover lip and lay them in place.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2



• Use your Framework Screwdriver to install the four 2.4 mm‑long T5 Torx screws to secure the two hinges to the Top Cover.
• Make sure to install these screws in the marked locations. There are additional screw holes on the hinges that are not for these screws.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Lay each antenna in place in the Top Cover.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Use your Framework Screwdriver to install the two 2.4 mm‑long T5 Torx screws to secure the antennas to the Top Cover.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5
• Use your fingers and your Framework Screwdriver to guide and press both antenna cables back into their channels.
• Zoom in on the third image to see how the cables sit in their channels.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-187485" src="https://www.ifixit.com/Guide/embed/187485/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-187485"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/187485" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview