Skip to main content

Shop the Holiday Gift Guide
Free Shipping on Domestic Orders $75+

Framework Laptop 12 Post-hinge Installation Steps

Views: 127

View statistics:

Past 24 Hours:
0
Past 7 Days:
1
Past 30 Days:
5
All Time:
127
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 0

No one has marked this guide "completed." Will you be the first?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: No estimate
Difficulty: Moderate
Prerequisite Only

This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.

Framework Laptop 12 Post-hinge Installation Steps

Introduction

Go to step 1 ↓

A set of installation steps that go after the hinge guides, but before the bottom cover disconnect prereq

This is the installation version of the Pre-hinge Removal Steps

What you need

    1. Framework Laptop 12 Post-hinge Installation Steps, Install the display into the Top Cover: step 1, image 1 of 3 Framework Laptop 12 Post-hinge Installation Steps, Install the display into the Top Cover: step 1, image 2 of 3 Framework Laptop 12 Post-hinge Installation Steps, Install the display into the Top Cover: step 1, image 3 of 3
      • Carefully swing the display onto the Top Cover such that the top edge of the display sits slightly below the top edge of the Top Cover.

      Ask FixBot

      Add Comment

    2. Framework Laptop 12 Post-hinge Installation Steps: step 2, image 1 of 3 Framework Laptop 12 Post-hinge Installation Steps: step 2, image 2 of 3 Framework Laptop 12 Post-hinge Installation Steps: step 2, image 3 of 3
      • Use your fingers to slide the display upwards to latch the tabs on the top edge of the display.

      • The top edge shouldn't have any gaps when the display's in place.

      Ask FixBot

      Add Comment

    3. Framework Laptop 12 Post-hinge Installation Steps: step 3, image 1 of 1
      • Use your Framework Screwdriver to install the four 3.2 mm‑long T5 Torx screws to secure the display to the Top Cover.

      Ask FixBot

      Add Comment

    4. Framework Laptop 12 Post-hinge Installation Steps, Install the Display Cover: step 4, image 1 of 3 Framework Laptop 12 Post-hinge Installation Steps, Install the Display Cover: step 4, image 2 of 3 Framework Laptop 12 Post-hinge Installation Steps, Install the Display Cover: step 4, image 3 of 3
      • Lay the Display Cover in place below the display.

      • Use your finger to press along the length of the Display Cover to snap it onto the laptop.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Arthur Shi

Member since: 01/03/18

353,975 Reputation

938 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 127