Skip to main content

Introduction

Use this guide to remove the Fox Shocks Float RP2 Propedal.

Parts

No parts specified.

  1. Open the upper damper bolt using a 6mm allen key. Remove the damper bolt.
    • Open the upper damper bolt using a 6mm allen key.

    • Remove the damper bolt.

  2. Open the lower damper bolt using a 6mm allen key and a wrench. Remove the damper bolt and lift out the Float RP2 Propedal damper.
    • Open the lower damper bolt using a 6mm allen key and a wrench.

    • Remove the damper bolt and lift out the Float RP2 Propedal damper.

Conclusion

To reassemble your bike, follow these instructions in reverse order.

Dominik Schnabelrauch

Member since: 11/23/2016

94,483 Reputation

387 Guides authored

Team

iFixit Member of iFixit

Community

138 Members

16,450 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 7

Past 30 Days: 14

All Time: 709