Introduction

In order to open your device to gain access to the parts inside your device you will need to follow this steps closely . You will need certain tools such as a Phillips Head screwdriver, #00 3mm screws, spudger, plastic opening tool, as well as careful movements so you don't break any other components.

Parts

No parts required.

Use a Phillips 00 bit to remove two 3mm screws from the bottom of the tablet.
  • Use a Phillips 00 bit to remove two 3mm screws from the bottom of the tablet.

Add Comment

Black Friday
Broken doesn't stand a chance.
Insert the nylon spudger into the bottom of the tablet, and gently slide it up the side. Pull apart the two sides of the tablet, exposing the circuit board, battery, and other components of the tablet. Pull apart the two sides of the tablet, exposing the circuit board, battery, and other components of the tablet.
  • Insert the nylon spudger into the bottom of the tablet, and gently slide it up the side.

  • Pull apart the two sides of the tablet, exposing the circuit board, battery, and other components of the tablet.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Easton Olsen

Member since: 09/15/2016

267 Reputation

2 Guides authored

Team

USF Tampa, Team 2-5, Blackwell Fall 2016 Member of USF Tampa, Team 2-5, Blackwell Fall 2016

USFT-BLACKWELL-F16S2G5

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 8

All Time: 170