DualSense Controller v2 L1 and R1 Button Replacement - iFixit Repair Guide

Introduction

Follow this guide to replace the L1 and/or R1 buttons on your Sony DualSense controller.

Note: This guide is for current DualSense controllers with FCC IDs that end with A. Check the back of your controller to verify your model. If yours ends in a 1, it is an early model and there will be internal differences. Follow these guides for the earlier version.

What you need

Step 1 Remove the L1 button

DualSense Controller v2 L1 and R1 Button Replacement, Remove the L1 button: step 1, image 1 of 3

DualSense Controller v2 L1 and R1 Button Replacement, Remove the L1 button: step 1, image 2 of 3

DualSense Controller v2 L1 and R1 Button Replacement, Remove the L1 button: step 1, image 3 of 3

Insert the flat end of your spudger into the gap above the L1 button.
Cover the button with your thumb to prevent it from ejecting across the room.
Pry the spudger upward to remove the L1 button.

Step 2 Remove the R1 button

DualSense Controller v2 L1 and R1 Button Replacement, Remove the R1 button: step 2, image 1 of 3

DualSense Controller v2 L1 and R1 Button Replacement, Remove the R1 button: step 2, image 2 of 3

DualSense Controller v2 L1 and R1 Button Replacement, Remove the R1 button: step 2, image 3 of 3

Insert the flat end of your spudger into the gap above the R1 button.
Cover the button with your thumb to prevent it from ejecting across the room.
Pry the spudger upward to remove the R1 button.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

2 other people completed this guide.

Author

with 1 other contributor

Sam Omiotek

Member since: 02/25/19

73,170 Reputation

288 Guides authored

+32 more badges

0 Comments

View Statistics:

Past 24 Hours: 6

Past 7 Days: 31

Past 30 Days: 111

All Time: 1,062