Fix Your Stuff Community Store

DeWALT Hammer Drill DW511 Back Cover Replacement

Introduction

Removing the back cover of the DeWALT DW511 Hammer Drill allows for access to the internals of the device. This requires removing three screws and using an opening tool to pop off the back cover. Before beginning, make sure the drill is unplugged to avoid damaging components.

What you need

  1. DeWALT Hammer Drill DW511 Back Cover Replacement, Back Cover: step 1, image 1 of 3 DeWALT Hammer Drill DW511 Back Cover Replacement, Back Cover: step 1, image 2 of 3 DeWALT Hammer Drill DW511 Back Cover Replacement, Back Cover: step 1, image 3 of 3

    • Remove three 19 mm T20 Torx screws from the back of the drill.

    Edit

  3. DeWALT Hammer Drill DW511 Back Cover Replacement: step 2, image 1 of 3 DeWALT Hammer Drill DW511 Back Cover Replacement: step 2, image 2 of 3 DeWALT Hammer Drill DW511 Back Cover Replacement: step 2, image 3 of 3

    • Place an opening tool in the groove line of the handle and pop the back loose.

    • Grab the drill with two hands and pull the cover off.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 3 other contributors

Kristen Gismondi

Member since: 11/12/14

82,023 Reputation

200 Guides authored

Badges: 46

+43 more badges

Team

iFixit Member of iFixit

Staff

135 Members

17,198 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 138