Introduction
This guide will walk you through the steps of how to get to the speaker component of the keyboard in order to properly replace it.
What you need
-
-
Place device face-down.
-
Remove seventeen 16 mm screws with a Phillips #2 screwdriver.
-
Flip keyboard around so the keys are facing up.
-
-
-
-
Remove two 16 mm screws with a Phillips #2 screwdriver.
-
Pop the wires out of the plastic holders with a finger.
-
-
-
Turn the speaker around and place on the keyboard keys.
-
Remove four 16 mm screws with a Phillips #2 screwdriver.
-