Introduction

This guide will walk you through the steps of how to get to the speaker component of the keyboard in order to properly replace it.

Image 1/3: Remove seventeen 16 mm screws with a Phillips #2 screwdriver. Image 2/3: Flip keyboard around so the keys are facing up. Image 3/3: Flip keyboard around so the keys are facing up.
  • Place device face-down.

  • Remove seventeen 16 mm screws with a Phillips #2 screwdriver.

  • Flip keyboard around so the keys are facing up.

Add Comment

Image 1/2: Image 2/2:
  • Pull the black panel away from the keyboard.

Add Comment

Image 1/3: Pop the wires out of the plastic holders with a finger. Image 2/3: Pop the wires out of the plastic holders with a finger. Image 3/3: Pop the wires out of the plastic holders with a finger.
  • Remove two 16 mm screws with a Phillips #2 screwdriver.

  • Pop the wires out of the plastic holders with a finger.

Add Comment

Image 1/2: Remove four 16 mm screws with a Phillips #2 screwdriver. Image 2/2: Remove four 16 mm screws with a Phillips #2 screwdriver.
  • Turn the speaker around and place on the keyboard keys.

  • Remove four 16 mm screws with a Phillips #2 screwdriver.

Add Comment

Image 1/2: Follow the [https://www.ifixit.com/Guide/How+To+Solder+and+Desolder+Connections/750|How to Solder and Desolder Connections] guide for soldering help. Image 2/2: Remove the speaker.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alexa

Member since: 01/24/2017

621 Reputation

6 Guides authored

Team

Cal Poly, Team 10-2, Banghart Winter 2017 Member of Cal Poly, Team 10-2, Banghart Winter 2017

CPSU-BANGHART-W17S10G2

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 27

All Time: 136