Introduction
This guide walks you through the steps of replacing a the speaker cover on this keyboard.
What you need
-
-
Complete through step 3a of Speaker Replacement Guide, found here.
-
Remove eight 16 mm screws with Phillips #2 screwdriver
-
Remove cover and reassemble with new one
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 10-2, Banghart Winter 2017 Member of Cal Poly, Team 10-2, Banghart Winter 2017
CPSU-BANGHART-W17S10G2
4 Members
6 Guides authored
