What you need
-
-
Pull the back panel away from the camera body, starting at the end with the function buttons.
-
-
-
Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.
-
-
-
Push the metal frame away from the metal tab using the spudger to detach the frame.
-
Rotate the metal frame upwards.
-
-
-
Carefully lift the metal frame from the camera.
-
Remove the black LCD screen, leaving the thin lens pieces in place.
-
-
-
Carefully pull on the orange connector ribbon to disconnect the LCD screen.
-
The LCD screen can be pulled out of the frame before disconnecting its connector ribbon.
-
-
-
Remove the metal frame on the side closest to the flash mechanism. This will expose the screw securing the flash assembly.
-
-
-
Use the spudger to carefully disconnect the flash assembly ribbon from the black connector lock.
-