Fix Your Stuff Community Store

CHUWI GemiBook XPro Lower Case Replacement

Introduction

Use this guide to replace the lower case on your CHUWI GemiBook XPro.

What you need

  1. CHUWI GemiBook XPro Lower Case Replacement, Lower Case: step 1, image 1 of 2 CHUWI GemiBook XPro Lower Case Replacement, Lower Case: step 1, image 2 of 2

    • Discharge the battery below 25%, since a charged lithium-ion battery is a potential safety hazard. Fully power down the laptop and unplug any peripheries.

    • Orient the device to where you can see the bottom of the case.

    • Use a Phillips #1 screwdriver to remove the twelve 5.6 mm screws that secure the lower case.

    Edit

  3. CHUWI GemiBook XPro Lower Case Replacement: step 2, image 1 of 3 CHUWI GemiBook XPro Lower Case Replacement: step 2, image 2 of 3 CHUWI GemiBook XPro Lower Case Replacement: step 2, image 3 of 3

    • Insert an opening pick into the gap between the lower case and the chassis.

    • Pry along the entire perimeter of the laptop until the lower case fully releases.

    • Lift the lower case up and off of the chassis.

    Edit
Conclusion

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Author

Connor Bassolino

Member since: 03/29/22

17,370 Reputation

74 Guides authored

Badges: 29

+26 more badges

Team

iFixit Member of iFixit

Staff

123 Members

23,640 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 21

All Time: 189