Fix Your Stuff Community Store

Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement

Introduction

Follow these instructions to replace a damaged throttle control. Optionally, you may also replace the attached throttle control cable.

What you need

  1. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Cable: step 1, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Cable: step 1, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Cable: step 1, image 3 of 3

    • Cut and remove any zip ties securing the throttle cable.

    Edit

  2. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 2, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 2, image 2 of 2

    • Use a Phillips #2 driver to remove the screw securing the lower end of the throttle cable.

    Edit

  3. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 3, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 3, image 2 of 2

    • Remove the bracket securing the lower end of the throttle cable.

    Edit

  4. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 4, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 4, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 4, image 3 of 3

    • Rotate the lower end of the throttle cable to detach it from the throttle.

    Edit

  6. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 5, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 5, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 5, image 3 of 3

    • When reinstalling the throttle control cable, check to make sure that the throttle control moves the throttle through its full range of motion.

    • If necessary, loosen the screw securing the lower end of the throttle cable and adjust the position of the cable. Re-tighten the screw and check to make sure that the throttle moves through its full range of motion.

    Edit

  7. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 6, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 6, image 2 of 2

    • Use a 7/16" wrench or deep socket to remove the cap from the throttle control.

    Edit

  8. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 7, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 7, image 2 of 2

    • Advance the throttle control to expose the gear rack containing the upper end of the throttle cable.

    Edit

  9. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 8, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 8, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 8, image 3 of 3

    • Separate the gear rack from the upper end of the throttle cable.

    • Lift and remove the gear rack from the throttle control.

    • If the gear rack doesn't fully detach, advance the throttle control lever a little farther.

    • Lubricate the gear rack with a bit of lithium grease during reassembly.

    Edit

  10. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 9, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 9, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 9, image 3 of 3

    • Use a 1/2" wrench to unscrew the upper end of the throttle cable from the throttle control.

    • Slide the throttle cable down out of the bottom of the throttle control, and remove the cable.

    Edit

  11. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Control: step 10, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement, Throttle Control: step 10, image 2 of 2

    • Use a Phillips #2 driver to remove the two screws securing the throttle control.

    • While removing the screws, use a 3/8" wrench to counter-hold the lock nuts and prevent them from rotating.

    Edit

  12. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 11, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Control Replacement: step 11, image 2 of 2

    • Remove the throttle control.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

Author

Jeff Suovanen

Member since: 08/06/13

428,568 Reputation

259 Guides authored

Badges: 48

+45 more badges

Team

iFixit Member of iFixit

Staff

135 Members

17,207 Guides authored

One Comment

the part # is incorrect, it appears that it is 440014 not 440013

JACOB - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 16

All Time: 992