Skip to main content

Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement

What you need

  1. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: step 1, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: step 1, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: step 1, image 3 of 3
    • Cut and remove any zip ties securing the throttle cable.

  2. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 2, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 2, image 2 of 2
    • Use a Phillips #2 driver to remove the screw securing the lower end of the throttle cable.

  3. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 3, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 3, image 2 of 2
    • Remove the bracket securing the lower end of the throttle cable.

  4. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 4, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 4, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 4, image 3 of 3
    • Rotate the lower end of the throttle cable to detach it from the throttle.

  5. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 5, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 5, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 5, image 3 of 3
    • When reinstalling the throttle control cable, check to make sure that the throttle control moves the throttle through its full range of motion.

    • If necessary, loosen the screw securing the lower end of the throttle cable and adjust the position of the cable. Re-tighten the screw and check to make sure that the throttle moves through its full range of motion.

  6. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 6, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 6, image 2 of 2
    • Use a 7/16" wrench or deep socket to remove the cap from the throttle control.

  7. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 7, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 7, image 2 of 2
    • Advance the throttle control to expose the gear rack containing the upper end of the throttle cable.

  8. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 8, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 8, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 8, image 3 of 3
    • Separate the gear rack from the upper end of the throttle cable.

    • Lift and remove the gear rack from the throttle control.

    • If the gear rack doesn't fully detach, advance the throttle control lever a little farther.

    • Lubricate the gear rack with a bit of lithium grease during reassembly.

  9. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 9, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 9, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 9, image 3 of 3
    • Use a 1/2" wrench to unscrew the upper end of the throttle cable from the throttle control.

    • Slide the throttle cable down out of the bottom of the throttle control, and remove the cable.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Jeff Suovanen

Member since: 08/06/13

428,568 Reputation

259 Guides authored

Team

iFixit Member of iFixit

Staff

135 Members

17,218 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 10

Past 30 Days: 26

All Time: 1,886