Skip to main content

Battery Disconnect

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Battery Disconnect, Disconnect the battery: step 1, image 1 of 1
    • Peel back the tape covering the battery connector enough to reveal the connector underneath.

  2. Battery Disconnect: step 2, image 1 of 2 Battery Disconnect: step 2, image 2 of 2
    • Use a spudger to slide the battery connector parallel to the logic board and out of its socket on the logic board.

Adam O'Camb

Member since: 04/11/15

196,587 Reputation

416 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 6

All Time: 84