Skip to main content

Battery Disconnect

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Battery Disconnect, Disconnect the battery: step 1, image 1 of 1
    • Peel back the tape covering the battery connector enough to reveal the connector underneath.

  2. Battery Disconnect: step 2, image 1 of 2 Battery Disconnect: step 2, image 2 of 2
    • Use a spudger to slide the battery connector parallel to the logic board and out of its socket on the logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Adam O'Camb

Member since: 04/11/15

196,299 Reputation

416 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 78