Fix Your Stuff Community Store

Backbone One Right Trigger Replacement

Introduction

Use this guide to replace the right trigger on your Backbone One.

What you need

  1. Backbone One Right Trigger Replacement, Remove the screws: step 1, image 1 of 1

    • Use a Phillips screwdriver to remove the four 5.9 mm-long screws.

    Edit

  2. Backbone One Right Trigger Replacement, Rotate the upper part: step 2, image 1 of 3 Backbone One Right Trigger Replacement, Rotate the upper part: step 2, image 2 of 3 Backbone One Right Trigger Replacement, Rotate the upper part: step 2, image 3 of 3

    • Lift up the upper cover of the controller.

    • Swing the upper cover over and place it on the controller case.

    • Make sure that the interconnecting cable has no tension.

    Edit

  3. Backbone One Right Trigger Replacement, Remove the protective tape: step 3, image 1 of 3 Backbone One Right Trigger Replacement, Remove the protective tape: step 3, image 2 of 3 Backbone One Right Trigger Replacement, Remove the protective tape: step 3, image 3 of 3
    Tool used on this step:
    Tweezers
    $4.99
    Buy

    • Use a pair of tweezers to remove the yellow protective tape which is placed over the interconnect cable and the connector.

    Edit

  5. Backbone One Right Trigger Replacement, Open the interconnect cable ZIF connector: step 4, image 1 of 3 Backbone One Right Trigger Replacement, Open the interconnect cable ZIF connector: step 4, image 2 of 3 Backbone One Right Trigger Replacement, Open the interconnect cable ZIF connector: step 4, image 3 of 3

    • Use the tip of an opening pick to open the gray flap of the interconnect cable ZIF connector by pushing it upwards.

    Edit

  6. Backbone One Right Trigger Replacement, Disconnect the interconnect cable: step 5, image 1 of 2 Backbone One Right Trigger Replacement, Disconnect the interconnect cable: step 5, image 2 of 2

    • Disconnect the cable by pulling it straight out the ZIF connector.

    Edit

  7. Backbone One Right Trigger Replacement, Disconnect the phone connector cables: step 6, image 1 of 3 Backbone One Right Trigger Replacement, Disconnect the phone connector cables: step 6, image 2 of 3 Backbone One Right Trigger Replacement, Disconnect the phone connector cables: step 6, image 3 of 3

    • Use a pair of tweezers to disconnect the phone connector cables out from their sockets.

    Edit

  8. Backbone One Right Trigger Replacement, Separate the upper case: step 7, image 1 of 1

    • Separate the the upper case of the left controller handle.

    Edit

  9. Backbone One Right Trigger Replacement, Remove the screws: step 8, image 1 of 1

    • Use a Phillips screwdriver to remove the three 5.9 mm-long screws.

    Edit

  10. Backbone One Right Trigger Replacement, Remove the trigger: step 9, image 1 of 2 Backbone One Right Trigger Replacement, Remove the trigger: step 9, image 2 of 2

    • Remove the trigger.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Opening didn’t go as planned? Answers community for help.

One other person completed this guide.

Author

with 1 other contributor

Adriana Zwink

Member since: 12/18/19

62,043 Reputation

167 Guides authored

Badges: 35

+32 more badges

Team

iFixit Member of iFixit

Staff

123 Members

23,638 Guides authored

2 Guide Comments

where can I buy a right trigger replacement?

pelony felony - Reply

where can I buy a right trigger replacement?

Ricardo Gazo Rosario - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 10

Past 30 Days: 55

All Time: 1,380