Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

This is the default guide in which is needed to be done in order to reach all of the other components of the device. It is an easy replacement guide which is comprised of only 4 screws and some clips holding it together.

Parts

No parts specified.

  1. Remove all the tape and plugs to access the screws beneath.
    • Remove all the tape and plugs to access the screws beneath.

  2. Manta Driver Kit

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  3. Unscrew all 5 of the .3mm t4 screws from the back plate of the device.
    • Unscrew all 5 of the .3mm t4 screws from the back plate of the device.

  4. Gently go around the outside of the back plate and pry the back cover off.
    • Gently go around the outside of the back plate and pry the back cover off.

Joshua Stoddard

Member since: 10/28/2015

529 Reputation

3 Guides authored

Team

UMass Dartmouth, Team 1-3, Miles Fall 2015 Member of UMass Dartmouth, Team 1-3, Miles Fall 2015

UMASSD-MILES-F15S1G3

3 Members

6 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 452