Difficulty
Moderate
Steps
3
Time Required
5 minutes
- Back plate 3 steps
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Needs More Images
A few more images would make this guide's procedures crystal clear.
Introduction
This is the default guide in which is needed to be done in order to reach all of the other components of the device. It is an easy replacement guide which is comprised of only 4 screws and some clips holding it together.
Parts
No parts required.
-
Remove all the tape and plugs to access the screws beneath.
-
Unscrew all 5 of the .3mm t4 screws from the back plate of the device.
-
Gently go around the outside of the back plate and pry the back cover off.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
UMass Dartmouth, Team 1-3, Miles Fall 2015 Member of UMass Dartmouth, Team 1-3, Miles Fall 2015
UMASSD-MILES-F15S1G3
3 Members
3 Guides authored
