Introduction

Upgrade your RAM for an instant increase in speed.

The M15x uses DDR3 1333MHz memory.

Image 1/1:
  • First, take off the battery by moving the latch to the left and pulling it up.

Add Comment

Image 1/3: Pull the cover down, then up, revealing the internals Image 2/3: Pull the cover down, then up, revealing the internals Image 3/3: Pull the cover down, then up, revealing the internals
  • Then unscrew the two Phillips screws.

  • Pull the cover down, then up, revealing the internals

Add Comment

Image 1/1:
  • Unscrew the two screws indicated

Add Comment

Image 1/2: These tabs lock the chip in place and releasing them will cause the chip to "pop" up. Image 2/2: After the RAM chip has popped up, pull it straight out of its socket.
  • Release the tabs on each side of the chip by simultaneously pushing each tab away from the RAM.

  • These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

  • After the RAM chip has popped up, pull it straight out of its socket.

  • Repeat this process if a second RAM chip is installed.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

Gabe

Member since: 04/09/2010

7,723 Reputation

3 Guides authored

Team

Master Techs Member of Master Techs

Community

263 Members

612 Guides authored

One Comment

I saw somewhere that it actually takes DDR2 ram not DDR3....

John Moreau - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 15

Past 30 Days: 59

All Time: 23,078