Introduction
This guide will show the reader how to remove the back panel from their Acer Aspire R5-571T-59DC.
Be sure to be gentle opening the inner snaps around the lining of the cover - gently running a credit card or spudger around the inside of the lining should be sufficient to loosen the cover.
This is a prerequisite step to replacing any component connected to the motherboard.
What you need
-
-
Turn laptop over.
-
Remove the 07.mm Phillips #0 screws (total of 12 screws) from the back cover of the device.
-
Using the spudger, gently pry the back cover off of the device. There are several plastic snaps located on the inside of the cover - run the spudger around the perimeter of the cover to open each snap. Once the back cover is fully disconnected from the device, lift the cover off and set aside.
-
-