Skip to main content

Introduction

If you have battery problems or need to remove your battery before replacing other parts of the laptop, use this guide to remove and replace your battery.

  1. Turn off the laptop and disconnect all device cords.
    • Turn off the laptop and disconnect all device cords.

  2. Flip the laptop over so the bottom is facing you.
    • Flip the laptop over so the bottom is facing you.

  3. Use your finger or a spuger to pull the battery release switch. Use your finger or a spuger to pull the battery release switch. Use your finger or a spuger to pull the battery release switch.
    • Use your finger or a spuger to pull the battery release switch.

  4. Remove the battery from the laptop. Remove the battery from the laptop. Remove the battery from the laptop.
    • Remove the battery from the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

2 other people completed this guide.

Faith Lobaton

Member since: 10/22/2018

449 Reputation

3 Guides authored

Team

UC Davis, Team S4-G5, Lore Fall 2018 Member of UC Davis, Team S4-G5, Lore Fall 2018

UCD-LORE-F18S4G5

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 36

Past 30 Days: 172

All Time: 6,234