ASUS Q536F Screen Replacement

Introduction

Our laptops screen cracked so we needed to replace it. This guide will help you in the process of replacing the display screen for ASUS Q536F. If your screen is damaged in any way, for example, cracked screen, pixels not properly displayed, not displaying vivid colors, or just simple damage being seen, then the entire screen needs to be replaced.

In the process of replacing the screen, take extra precaution, as you are working with a screen and it can shatter. Make sure you take time to wear equipment such as safety glasses. This simple-to-follow tutorial will help users prolong the life of their laptops and replace the screen. Make sure to have the laptop unplugged and powered off before proceeding.

What you need

Step 1 Back Panel

ASUS Q536F Screen Replacement, Back Panel: step 1, image 1 of 2

ASUS Q536F Screen Replacement, Back Panel: step 1, image 2 of 2

Remove ten 2 mm screws using a Phillips #0 screwdriver.
Remove the screw in the center using a T4 Torx screwdriver.
Use an iFixit opening tool to pry open the back panel.
It's normal to hear some cracking, but proceed with caution.

Edit

Step 2 Display Assembly

ASUS Q536F Screen Replacement, Display Assembly: step 2, image 1 of 1

Remove the six 2 mm screws from the hinges using a Phillips #0 screwdriver.

Edit

Step 3

ASUS Q536F Screen Replacement: step 3, image 3 of 3

Using your fingers, unplug the two power cables connecting the display to the motherboard.
Remove the display assembly from the laptop.

Edit

Step 4 Screen

ASUS Q536F Screen Replacement, Screen: step 4, image 1 of 3

ASUS Q536F Screen Replacement, Screen: step 4, image 2 of 3

ASUS Q536F Screen Replacement, Screen: step 4, image 3 of 3

Potential for device damage: Beneath the screen border is a sticky adhesive. Take your time and exercise caution when removing to avoid damaging it.
Use an iOpener to help loosen the adhesive on the screen.
Gently pry the bottom right corner of the screen's border and remove the sticky screen cover.
Use the opening tool around the entire display to ensure you cut as much adhesive as possible.