4Sight 9 Cover Replacement

You're viewing a previously published version of this guide. View latest version

Jun 23, 2015 - 04:24:56

Dec 16, 2021 - 02:58:29 Dec 16, 2021 - 02:58:02 Dec 16, 2021 - 02:57:30 Dec 16, 2021 - 02:56:52 Sep 20, 2021 - 06:26:16 Sep 20, 2021 - 06:10:04 Sep 20, 2021 - 06:01:03 Sep 20, 2021 - 03:12:16 Sep 16, 2021 - 06:20:49 Jun 23, 2015 - 04:24:56 Jun 23, 2015 - 04:24:39 Jun 23, 2015 - 04:24:24 Jun 23, 2015 - 04:24:15 May 28, 2015 - 10:49:39 May 28, 2015 - 09:25:19 May 28, 2015 - 09:23:49 May 28, 2015 - 09:23:42 May 28, 2015 - 09:23:28 May 28, 2015 - 09:23:08 May 28, 2015 - 09:23:08 May 28, 2015 - 08:22:25 May 28, 2015 - 08:09:55 May 28, 2015 - 08:08:26 May 28, 2015 - 08:07:21 May 19, 2015 - 10:25:16 May 19, 2015 - 10:22:27 May 19, 2015 - 10:22:07 May 19, 2015 - 09:40:39 May 19, 2015 - 09:40:39 May 19, 2015 - 09:39:06 May 19, 2015 - 09:39:06 May 19, 2015 - 09:33:17

Newer

Introduction

To remove the cover of the tablet you will need a plastic prying tool and 1mm Phillips Screwdriver. Be sure to allot roughly 2-3 minutes for the process. If you don't have a plastic prying tool, your fingers should suffice.

What you need

Step 1 Cover

4Sight 9 Cover Replacement, Cover: step 1, image 1 of 2

4Sight 9 Cover Replacement, Cover: step 1, image 2 of 2

Take tablet and rotate on its side, so that the two screws are facing upward.
Use Phillips #00 Screwdriver to remove two 1mm screws on the left side of the tablet.

Step 2

Insert plastic prying tool and pry back case away from the device slowly moving the plastic prying tool along the device.
Once loosened, use hands to help separate case from device.