Introduction

Remove scratches from a scratched AirPod charging case

Parts

No parts required.

Both sides are heavily scratched
  • Both sides are heavily scratched

Add Comment

Use P2000 to P30000 sandpaper. I first used P2000 sandpaper, and then P3000 sandpaper.
  • Use P2000 to P30000 sandpaper. I first used P2000 sandpaper, and then P3000 sandpaper.

Add Comment

  • After sanding the charging box, clean with a cotton swab and rubbing alcohol

Add Comment

  • Use cotton and alcohol to clean the surface of the charging box.

  • You should also clean the inside.

Add Comment

  • Wet the surface with cotton and alcohol (or water), and use P2500 sandpaper to polish the surface.

  • Most of the scratches should now look smooth. The shiny surface should have become matte.

  • Depending on the state of the case, you can redo this step several times.

Add Comment

  • There are no more scratches, but the surface is still matte.

  • If you have suddenly become fond of this matte feel, you are done.

  • If you prefer the shiny surface, use >P3000 sandpaper and conduct step 5.

Add Comment

  • And the box is back to near pristine condition!

Add Comment

Conclusion

The charging box should now be in pristine condition

8 other people completed this guide.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Z.Heng

Member since: 04/08/2017

2,393 Reputation

3 Guides authored

2 Comments

Extremely convincing, especially the last picture.

Ludger - Reply

感谢作者!我的AirPods也布满了划痕!

Zhang Boyang - Reply

Add Comment

View Statistics:

Past 24 Hours: 28

Past 7 Days: 215

Past 30 Days: 949

All Time: 6,794