Fix Your Stuff Community Store

Model A1311 / Mid 2010 / 3.06 & 3.2 GHz Core i3 or 3.6 GHz Core i5 Processor

342 Questions View all

Options

My screen does not work after replacing superdrive

I have an iMac 21.5, EMC 2389 model. After replacing the Superdrive with a SSD I have damaged the monitor data cable (APPLE P / N 593-1280 VENDOR: ACON) and has come out a cable wire vertical sync LED card (APN: 593-1237 REV : A VENDOR: LW). The case is now unbootable iMac screen after being turned off, however if it boots the screen when I restart the iMac. Know if these symptoms may be normal for educated the monitor data cable?, Where I can buy these cables?

Thanks for your help and sorry for my English by google traslator.

Answer this question I have this problem too

Is this a good question?

Yes No
Score 4
Add a comment

3 Answers

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Go here to find your part number: http://www.welovemacs.com/mc508lla.html

Click on the box to the left of this to blow it up: Apple iMac 21.5-inch 3.06GHz Intel Core i3 (MC508LL/A) Parts & Upgrades

Was this answer helpful?

Yes No
Score 2

1 Comment:

ok thank you very much.

by

Add a comment

Options

I believe that the cable that you need is this one. Double check your model number before ordering.

Was this answer helpful?

Yes No
Score 0

1 Comment:

Thank you for your help.

I am not sure that this is the cable that you indicate. I think the smart thing is to bring the iMac repair center.

by

Add a comment

Options

This is the cable you need.

http://www.ebay.com/itm/New-LCD-Cable-59...

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Joan Recasens will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 1,737