MacBook not charging, and MagSafe Board replaced.
I have an early 2006 Macbook that is says it is not charging. Also, I do not get a POST chime upon startup, however the computer does load the OS with no problems at all. I have:
-replaced the battery which worked until the charge was gone, but it still would not charge.
-tried another known good battery, again the same thing happened here.
-tried multiple power adapters
-did the Apple Hardware test twice. Both times it came back with no problems.
-reset the SMC twice
-reset the PRAM twice
-replaced the MagSafe Board
-verified Disk
No matter what I have done, the computer just will not charge, but it will work off a good battery when unplugged. As soon as I unplug it with a drained battery it dies immediately. I'm thinking logic board, but don't know how, or if, that is the issue.
Is this a good question?