top right hand corner logic board not seating properly
replaced the digitizer on the ipod and only half off of the screen would sense a finger.
got a new digitizer, dissembled
For some reason now I cant get the top roght hand area of the logic board to click back into place. Its lined with the screw hole but juset seems to high.
The right hand side is fine.
If i place both my thumbs on either side of the board and apply pressure back and forth i can feel it "see saw"
There is anything stuck between the under side of the board and the case, I just don't want to apply a huge amount of pressure and snap it.
If anyone has any suggestions - It would be greatly appreciated.
Is this a good question?