Rep: 57
2
1
I've done 2 iPod touch 4th gen screen replacements and both times the screens haven't stuck very well. They don't seem to stay tight to the frame.
Both times I replaced the adhesive and made sure all broken glass was cleaned out of the frame.
What is the trick to getting the glass back on properly?
Is this a good question?
Rep: 2k
12
8
7
Are you making sure the metal plate is getting screwed down tight and the digitizer cable is folded properly at the top? Those are a couple of thing that may help.
I've never had issues getting it to stick well. Always put in new adhesive and I recommend using a head gun to warm the new glass (and therefore adhesive) and then put some pressure on the screen for a while to get the heated adhesive to take well. I generally put the iPod face down on a towel that is lying on a flat surface. Then I put a couple of heavy books on top of the iPod. Always works.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 414
