Fix Your Stuff Community Store

Repair guides and information for the Nintendo Switch Joy-Con controllers.

192 Questions View all | 13 Parts Shop

Options

Right joy con not charging after replacing analogue stick

Some months ago I had joy con stick drift on both joy cons and as the mechanic that I was i tried to fix them and the left one i successfully changed the stick as well for the case of the joy con with a transparent one that looks very nice and when I was about to close the right joy con i realized that it wont charge i knew it still work cuz it was 100 % when I changed the stick and for 4 days it worked until the battery died so now I think I need some help in fixing them (I might have a suspicion that the fuse might be to blame for the joy con not charging because I didn't have the plastic tweezers at the time) so if you have ideas please don't hesitate to tell me. Or to bypass the fuse

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
3 Comments

[image|3652722]

by

[image|3653522] idk it just doesn't load

by

Hi!

Please check the comment below (from my answer).

Thanks!

by

Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Hi!

Could be. Could also be the rail which failed. The only way to know is to replace and test. Bypassing the fuse is possible (direct solder connection) but is not recommended at all.

If you can share some pictures with us regarding the ribbon cables and motherboard, that would be great!

Was this answer helpful?

Yes No
Score 1

2 Comments:

No it's not from the rail I just change them both with new ones thinking that might have been the problem

by

Alright. Did you checked the fuse with continuity test? Also, the picture is not uploaded. Here is how to do it: Adding images to an existing question.

Thanks!

by

Add a comment

Add your answer

Popa Rațiu Alexandru will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 14

All Time: 83