Fix Your Stuff Community Store

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1500 Questions View all

Options

iPhone 3GS stuck at logo after battery replacement

Hello!

I replaced my iphone`s baterry with a new one and now it is stuck at logo.

The phone starts only when I connect it to the power cord (PC or wall adapter) and it is unrecognized by Itunes (itunes detects nothing actually)

I replaced the battery because it had almost 600 cycles and I supposed that was the problem. Before replacing the battery iphone could stay on only with a power cord.

Do I have to reset it or I fried the logic board and now it s useless?

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score -1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

baghy, try the old battery and see if it gets past the logo. If it does, you know it is the replacement battery. Also, make sure that you have the right battery and are not using a 3G battery. Hope this helps, good luck.

Was this answer helpful?

Yes No
Score 2
Add a comment

Add your answer

baghy will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 408