Fix Your Stuff Community Store

Repair guides, disassembly, and troubleshooting information for the fourth generation Sony PlayStation 5 DualSense controller, successor to the DualShock series. Identified by model number CFI-ZCT1W and motherboard model BDM-040.

20 Questions View all

Options

How do I tear it down

I need to know how to test it down

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 1
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Hi!

I think the most easiest way is to follow this guide: DualSense Controller v2 Motherboard Replacement

This basically tells you how to get to the last part. I know this is for the V2 controller instead for the V4, but the process is almost the same.

Was this answer helpful?

Yes No
Score 0

4 Comments:

what is the diffrence bertween the v2 and the v4 coontroller?

by

Hi!

Minor differences. Just some other parts are used from another brand. Like the triggers and rubbers are slightly improved. No big changes.

by

Thats wrong. The whole motor/shoulder trigger assembly is different. There are no screws on the front side (where the buttons press against the board) and no metal axle for L2/R2 also the flex-connectors are just 3 pins

by

Hi! I'm sorry! You are correct! The difference between the V1 and V2 aren't that big. Later on they did start with the 3 pins! My appologies!

by

Add a comment

Options
Block Image

V4 has 4 wires instead of 2. also the flex cables are smaller.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Tavin Bauerle will be eternally grateful.
View Statistics:

Past 24 Hours: 10

Past 7 Days: 79

Past 30 Days: 328

All Time: 3,637