Sawdust does not exit to the dust bin
All of a,sudden the dust no longer exits into the dust bin. Rather, it goes out the bottom of the planer
Is this a good question?
Score
0
875566
1 Answer
Rep: 835.7k
1.3k
940
2.4k
@briandangler Time for a good cleaning and possibly checking the the exhaust path for obstruction. Sometimes blowing compressed air into the chip outlet might remove any obstruction out of the deflector pipe. I would expect some obstruction in the path from the cutters to the deflection pipe. Of course, check the deflector pipe and the port selectro leer as well to ensure it operates properly.
Was this answer helpful?
Score
0
