My front usb-c connector stopped working, when I plug into the regular USB it works but when I plug into the usb-c I get a message on the screen saying usb device drawing too much power; even if I just plug in a cable with no phone or controller plugged in.
Is this a good question?
Rep: 1.3k
30
3
3
The USB Type-C port pins have likely been damaged/bent to the point they touch each other and short, triggering the overcurrent protections and causing the error message to display. Buying a USB board replacement and following this procedure will likely completely eliminate your problem.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 14
