powers on but clicks a few times then says f01 before shutting off
My Maytag bravos quiet series 300 powers on but clicks a few times then says f01 before shutting off
Is this a good question?
Score
0
837417
1 Answer
Rep: 783.8k
1.1k
894
2.3k
@slap F01 usually refers to the control board. While it is possible that it is the board, you also want to check the air hose that runs near the board to the drum. Make sure that it is not kinked or clogged. A few puffs of compressed air can fix this. For a great fix about the F01 error, Check the answer on here Getting a code F:01
Was this answer helpful?
Score
0
Hi @slap,
What is the model number (not the model series number) of the washer?
by jayeff