The connector together with the copper plating from the board had come off. How can I fix it. No way I can resolder back this connector. If use jumper can anyone help with jumper points.
Is this a good question?
Rep: 783k
1.1k
893
2.3k
@acks25846 we will have to see what that looks like. We have a pretty good idea based what you are describing but seeing is believing. If the traces have torn off you may have to run some jumpers etc. Sometimes you may even have to replace the complete board. It's all a depends on what it looks like as well as your skills.
Was this answer helpful?
Past 24 Hours: 1
Past 7 Days: 1
Past 30 Days: 1
All Time: 36
