Fix Your Stuff Community Store

Repair guides for displays (or monitors) for computers or other devices with video output.

508 Questions View all

Options

The HDMI port on my monitor was forcibly removed, what now?

Hi!

I have an old monitor which belongs to an, apparently, obscure brand named Mitsai. The model is 22VLM12. The HDMI port was forcibly removed a long time ago and back then I had no experience in repairing components, so I threw the port away.

Now I wanted to fix the monitor and re-attach an HDMI port there but I have no idea what kinds of HDMI female ports are appropriate. The manual doesn't seem to say much and inspecting the board isn't helping me either, perhaps a more experienced person here could identify a part that I could order for this? Below is an image of where it should go, in CN707

Block Image

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

@teh trick here is that you are looking for a vertical HDMI port. You can take the necessary measurement needed for a replacement, from the solder pads on your board. For example, you will need the contact to contact measure as well as the outside dimensions etc. Check the drawing here

Block Image

and compare those measurements to your board. If they match, something like this will work. Otherwise check Digikey.com or Mouser.com for a port that will match your board.

Was this answer helpful?

Yes No
Score 3
Add a comment

Add your answer

Bernardo will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 26