Rep: 55
2
Hello, a customer brought me her watch after it wouldn't turn on and stuck on an Apple logo. I checked the watch and tried to hard reset it but without success, in addition the watch heats up when it is charging... what could be the problem? the battery?
Is this a good question?
Rep: 57.4k
124
44
90
Hi Matan,
I've got one of the original Apple Watches with the same problem, and unfortunately I haven't found a fix for it yet. In my case the watch was given to me by my son after he upgraded. I had originally replaced the battery in it a couple of years beforehand, but it had been sitting in a drawer for a year or so before I got it.
The battery was totally dead, so I ordered a replacement from iFixit and that kind of got it going - at least to the point where you're at. I requested a replacement and once that was in the overheating stopped, but it still refuses to boot and won't go past the logo no matter what I do.
I strongly suspect the firmware needs restoring, but of course with no attachment to an iPhone, on the Watch that's impossible. I've been eyeing the iBus adapter that appears to allow you to connect up a standard USB port to the watch and update it with iTunes just as you would any other Apple device, but so far I can't justify the cost when I can just buy a fully functional watch for the same price or even cheaper.
That's really as far as I've ever gotten, so if you find a way to get it going, I'll be very interested to see it. Here's my original post for more information.
Displays Apple logo for a second then back to black. - Apple Watch - iFixit
Was this answer helpful?
Past 24 Hours: 1
Past 7 Days: 3
Past 30 Days: 12
All Time: 119
